PES-1014 User’s Guide
5-4
Port
FIELD
DESCRIPTION
EXAMPLE
Security
Use the
Security
box to set up security functions for the selected port.
Select
Enable
, to have the switch discard all packets that violate the
security parameters. A security violation is defined as any incoming
packet that does not match an SA (Source MAC Address) in the
forwarding database. When
Disable
is selected, the SA of incoming
packets is not checked. See
8.2.2
for information on adding static entries
to the forwarding database.
Disable
(default)
Address Learning
Select
Enable
to enable or
Disable
to disable dynamic MAC address
learning.
Enable
(default)
Full Duplex Flow
Control (802.3x)
(Ethernet ports
only)
Select
Enable
to enable or
Disable
to disable 802.3x Full Duplex Flow
control.
Enable
(default)
Auto Negotiation
(Ethernet ports
only)
When you select
Enable
the port automatically negotiates the
transmission rate and duplex mode.
When you select
Disable
auto negotiation is turned off and you need to
specify the transmission rate and duplex mode manually.
Enable
(default)
Speed/Duplex
(Ethernet ports
only)
Select the data transmission rate and duplex mode of the selected port
(see
Table 5-2
).
To enable the forcing mode operation, you must disable auto-negotiation.
100 Full
(default)
Broadcast Storm
Control
Select
Enable
to turn on Broadcast Storm Control. This discards
consecutive incoming broadcast packets that exceed the programmed
threshold (set in the
system configuration
screen).
Select
Disable
to cancel Broadcast Storm Control.
Enable
(default)
Click
Apply
to save your changes to working memory or click
Reset
to go to the previous configuration. Refer
to
3.5.4
for directions on saving your changes to flash memory before you restart the switch.
5.4 Port
Assigned
Move the cursor over the
Port
link and then click
Port Assigned
to display the
Port Assigned
screen shown next.
Use the
Port Assigned
screen to copy a selected port’s settings to other ports.
