PES-1014 User’s Guide
Port
5-3
Table 5-2 Speed/Duplex Settings
SPEED/DUPLEX
DESCRIPTION
100/FULL
This port is simultaneously sending and receiving transmissions at
100 Mbps (full duplex).
10/FULL
This port is simultaneously sending and receiving transmissions at
10Mbps (full duplex).
100/HALF
This port is sending or receiving at 100Mbps in one direction only
at a time (half duplex).
10/HALF
This port is sending or receiving at 10Mbps in one direction only at
a time (half duplex).
5.3 Port
Configuration
Click on a port’s
Port NO.
in the
All Ports Status
screen to bring up the
Port Configuration
screen. Use this
screen to configure the specified port.
Figure 5-3 Port Configuration
Table 5-3 Port Configuration Description
FIELD
DESCRIPTION
EXAMPLE
Port ID
The letter or number that identifies this port.
A
Port Name
Give each port a name (up to 255 characters) for identification purposes.
This field is case sensitive.
myportname
Access Status
Select
Enable
or
Disable
to enable or disable port access.
Enable
(default)
Connector
This read-only field shows the port’s connector type. There are RJ-11
phone connectors for the phoneline networking ports and TX (RJ-45)
Ethernet connectors for the Ethernet ports.
TX
