PES-1014 User’s Guide
5-2
Port
5.2
All Ports Status
Move the cursor over the
Port
link and then click
All Ports
to display the
All Ports Status
screen shown next. This
screen shows the link status, transmission speed and duplex mode of the current ports. Click a port’s number to link
directly to the selected port.
Figure 5-2 All Ports Status
Table 5-1 All Ports Status Description
FIELD
DESCRIPTION
EXAMPLE
Port NO.
Click
Port NO.
to go to a port’s configuring screen.
A
Port Name
Give each port a name (up to 255 characters) for identification purposes.
This field is case sensitive.
myport
Link
This column indicates the current link status of each port. UP represents
connected DOWN represents disconnected.
Up
Speed/Duplex
This column shows each port’s current transmission speed of 10 Mbps or
100 Mbps, as well as its duplex. Refer to
Table 5-2
for more information.
Duplex- “Full” indicates simultaneously sending and receiving
transmissions at 10Mbps or 100Mbps. “Half” indicates sending or
receiving at 10Mbps or 100Mbps in one direction only at a time.
100/FULL
STP Port Status
This column represents the port’s status in STP (Spanning Tree
Protocol). Possible states are forwarding, listening, learning, blocking and
“–“ (which means the Spanning Tree Protocol is disabled)
.
Refer to
Chapter 10
for more information on STP.
-
