PES-1014 User’s Guide
4-8
System
FIELD
DESCRIPTION
EXAMPLE
The name is case sensitive and can be a maximum length
of 12 characters.
(default)
Community
Indicates the name of the community that the management
host belongs to. See the previous figure or the top half of
the screen.
public
(default)
Status
Select either
Enable
or
Disable
to enable or disable the
SNMP management functions of each management host.
Enable
(default)
Click
Apply
to save your changes to working memory or click
Reset
to go to the previous configuration. Refer to
3.5.4
for directions on saving your changes to flash memory before you restart the switch.
4.7 Save
Changes
Move the cursor over the
System
link and click
Save Changes
to display the
Save Changes
screen shown next. All
the settings mentioned above are stored only in working memory and are lost after the power is turned off. After
you configure settings, use the following procedure to store them:
Step 1.
Click
Apply
.
Step 6.
Click
System
in
Information
, and then
Save Changes
.
Step 2.
Click
Save
to save the settings into flash memory.
Restart the device (see
3.5.4
) to store the settings in long term memory.
Figure 4-8 Save Changes
4.8 Firmware
Upgrade
Use Internet Explorer 5.0 or later to upgrade the firmware.
Do not interrupt the upgrade process (interrupting it causes an error).
Restart the switch immediately after the upgrade is completed.
Move the cursor over the
System
link and click
Software Upgrade
to display the
Firmware Upgrade
screen
shown next.
•
Download the new version firmware file through Internet by web browser or FTP.
