Prestige 794M User’s Guide
85
Chapter 7 VPN
7.3.6 IPSec VPN Configuration
To configure an IPSec VPN connection, click
Create
in the main
IPSec
screen.
Figure 59
IPSec: Create
The following table describes the labels in this screen.
Table 44
VPN Rules (IKE): Add Policy
LABEL
DESCRIPTION
Connection Name
Enter a descriptive name for identification purposes.
Local
Configure the fields to allow one or more than one computer on the LAN to use a
VPN connection.
Single Address
Select
Single Address
to allow one VPN client with the specified IP address to
use the VPN connection.
Enter a single IP address in the
IP Address
field.
Subnet
Select
Subnet Address
to allow more than one computer in the specified
subnet to use the VPN connection.
Enter the IP address and subnet mask in the
IP Address
and
Netmask
fields
respectively.
IP Range
Select
IP Range
to allow more than one computer in the specified IP address
range to use the VPN connection.
Enter the starting and ending IP addresses in the
IP Address
and
End IP
fields
respectively.
Remote
Configure the fields to allow one or more than one computer on the remote
network to use a VPN connection.
Secure Gateway
Address (or
Hostname)
Type the WAN IP address or hostname of the remote IPSec router with which
you're making the VPN connection.
