Prestige 794M User’s Guide
81
Chapter 7 VPN
7.2.2.2 LAN to LAN Connection
Use the
PPTP LAN to LAN
screen to configure the Prestige to accept connection requests
from a VPN client.
Figure 57
VPN: PPTP: LAN to LAN Connection
The following table describes the labels in this screen.
Idle Time
Specify the time interval in minutes (where there is no traffic between the Prestige
and the computer) that can elapse before the Prestige automatically disconnects
the connection.
Enter
0
to allow connection up all the time.
Apply
Click
Apply
to save the changes.
Table 41
VPN: PPTP: Remote Access (continued)
LABEL
DESCRIPTION
Table 42
VPN PPTP: LAN to LAN Connection
LABEL
DESCRIPTION
Connection Name Enter a descriptive name for identification purposes.
Type
Select
Dial Out
if you want your Prestige to operate as a client (connecting to a
remote VPN device).
Select
Dial In
to allow computers to establish a VPN connection to the Prestige.
When configuring your Prestige as a client, enter the remote
Server IP
Address
(or Hostname)
you wish to connection to.
When configuring your router as a server, enter the
Private IP Address Assigned
to Dial in User
address.
Server IP
Address (or
Domain
Name)
This field is applicable when you select
Dial
Out
in the
Type
field
Enter the IP address or the domain name of the remote VPN device.
Private IP
Address
Assigned to
Dialin User
This field is applicable when you select
Dial
In
in the
Type
field.
Enter the IP address (in dotted decimal notation) to assign to the remote VPN
client that initiates the VPN connection. For example, 192.168.1.10.
