manualshive.com logo in svg

ZyXEL Communications P-2612HW-F1 -, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications P-2612HW-F1 - Скачать руководство пользователя страница 191

 Chapter 10 Voice

P-2612HW Series User’s Guide

191

Each field is described in the following table.

Table 53   

VoIP > SIP Settings > Advanced

LABEL

DESCRIPTION

SIP Account

This field displays the SIP account you see in this screen.

SIP Server 
Settings
URL Type

Select whether or not to include the SIP service domain name when the 
ZyXEL Device sends the SIP number.

SIP - include the SIP service domain name.

TEL - do not include the SIP service domain name.

Expiration 
Duration

Enter the number of seconds your SIP account is registered with the 
SIP register server before it is deleted. The ZyXEL Device automatically 
tries to re-register your SIP account when one-half of this time has 
passed. (The SIP register server might have a different expiration.)

Register Re-
send timer

Enter the number of seconds the ZyXEL Device waits before it tries 
again to register the SIP account, if the first try failed or if there is no 
response.

Session Expires Enter the number of seconds the ZyXEL Device lets a SIP session 

remain idle (without traffic) before it automatically disconnects the 
session.

Min-SE

Enter the minimum number of seconds the ZyXEL Device lets a SIP 
session remain idle (without traffic) before it automatically disconnects 
the session. When two SIP devices start a SIP session, they must agree 
on an expiration time for idle sessions. This field is the shortest 
expiration time that the ZyXEL Device accepts.

RTP Port Range
Start Port

End Port

Enter the listening port number(s) for RTP traffic, if your VoIP service 
provider gave you this information. Otherwise, keep the default values.

To enter one port number, enter the port number in the Start Port and 
End Port fields.

To enter a range of ports,

• enter the port number at the beginning of the range in the Start 

Port field.

• enter the port number at the end of the range in the End Port field.

Voice 
Compression

Select the type of voice coder/decoder (codec) that you want the ZyXEL 
Device to use. G.711 provides higher voice quality but requires more 
bandwidth (64 kbps).

• G.711A is typically used in Europe.
• G.711u is typically used in North America and Japan.

G.726 operates at 16, 24, 32 or 40 kbps.

By contrast, G.729 only requires 8 kbps.

The ZyXEL Device must use the same codec as the peer. When two SIP 
devices start a SIP session, they must agree on a codec.

Содержание P-2612HW-F1 -




































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды