ZyXEL Communications NAS Series, Руководство пользователя

Страница: 39 / 364

Chapter 4 Web Configurator Basics
Cloud Storage User’s Guide
39
The following table describes the labels in this screen.
Table 10
Storage Volume
LABEL DESCRIPTION
Volume
Use this section to configure and manage volumes built on hard disks directly.
Create Click this to format internal hard disks and create a new volume. All data on the disk(s)
will be lost.
Note: This button is not available while the NAS is creating, deleting, or changing the
RAID type of any volume or disk group.
A pop-up screen appears if all installed hard disks are used by other volumes
or disk groups. You will need to install another hard disk into the NAS if any disk tray is
available or remove unnecessary volumes or disk groups to release the storage space.
Click OK to close this screen.
Figure 23
No Disk in NAS
Manage Select a volume and click Manage to edit, repair or expand the volume.
Note: This button is available only when you can repair, expand or change RAID type.
Delete Select a volume and click Delete to remove it.
Note: If you delete a volume, all data in the volume disks is erased.
Add Hot Spare Select a RAID 1 or RAID 5 volume and click Add Hot Spare to add another disk as a
hot-spare (standby) to the RAID array. A pop-up screen displays.
Figure 24
Add Hot Spare
Select a disk from the drop-down list box and then click Apply.
See Section 4.4.7 on page 68 for more information about RAID.
Note: The capacity of the disk you are adding must be equal to or greater than the largest
disk in the RAID 1 or RAID 5 array.