ZyXEL Communications LTE3301-PLUS, Руководство пользователя

Страница: 188 / 361

Chapter 10 Routing
Nebula Mobile Router User’s Guide
188
To configure a static route to route traffic from N1 to N2 :
1
Log into the Zyxel Device’s Web Configurator in advanced mode.
2
Click Network Setting > Routing .
3
Click Add new Static Route in the Static Route screen.
4
Configure the Static Route Setup screen using the following settings:
4a
Click the Active button to enable this static route. When the switch goes to the right ( ), the
function is enabled. Enter the Route Name as R .
4b
Set IP Type to IPv4 .
4c
Type the Destination IP Address 192.168.10.0 and IP Subnet Mask 255.255.255.0 for the destination,
N2 .
4d
Click the Use Gateway IP Address button to enable this function. When the switch goes to the right
( ), the function is enabled. Type 192.168.1.253 ( R ’s N1 address) in the Gateway IP Address field.
4e
Select VDSL as the Use Interface .
4f
Click OK .
Now B should be able to receive traffic from A . You may need to additionally configure B ’s firewall
settings to allow specific traffic to pass through.
A 192.168.1.34
R ’s N1 192.168.1.253
R ’s N2 192.168.10.2
B 192.168.10.33
Table 65 IP Settings in this Tutorial (continued)
DEVICE / COMPUTER IP ADDRESS