ZyXEL Communications LTE3301-PLUS, Руководство пользователя

Страница: 109 / 361

Chapter 7 Broadband
Nebula Mobile Router User’s Guide
109
Figure 61 Network Setting > Broadband
The following table describes the labels in this screen.
7.2.1 Add or Edit Internet Connection
Click the Edit or Modify icon next to a WAN interface to open the following screen. Use this screen to
configure a WAN connection.
Table 27 Network Setting > Broadband
LABEL DESCRIPTION
# This is the index number of the entry.
Name This is the service name of the connection.
Type This shows whether it is a cellular or Ethernet connection.
Mode This shows the connection is in routing mode.
Encapsulation This is the method of encapsulation used by this connection.
802.1p This indicates the 802.1p priority level assigned to traffic sent through this connection. This
displays
N/A when there is no priority level assigned.
802.1q This indicates the VLAN ID number assigned to traffic sent through this connection. This displays
N/A when there is no VLAN ID number assigned.
IGMP Proxy This shows whether the Zyxel Device act as an IGMP proxy on this connection.
NAT This shows whether NAT is activated or not for this connection.
Default
Gateway This shows whether the Zyxel Device use the WAN interface of this connection as the default
gateway.
IPv6 This shows whether IPv6 is activated or not for this connection. IPv6 is not available when the
connection uses the bridging service.
MLD Proxy This shows whether Multicast Listener Discovery (MLD) is activated or not for this connection. MLD
is not available when the connection uses the bridging service.
Modify Click the Modify icon to configure the WAN connection.
Click the Delete icon to remove the WAN connection.