manualshive.com logo in svg

ZyXEL Communications EX3510-B1, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications EX3510-B1 Скачать руководство пользователя страница 196

Chapter 15 Interface Grouping

EX3510-B1 User’s Guide

196

Figure 121   

Interface Group Configuration

The following table describes the fields in this screen.

Table 76   Interface Group Configuration

LABEL

DESCRIPTION

Group Name

Enter a name to identify this group. You can enter up to 30 characters. You can use letters, 
numbers, hyphens (–) and underscores (_). Spaces are not allowed.

WAN Interfaces 
used in the 
grouping

Select the WAN interface this group uses. The group can have up to one ETH interface.

Select 

None

 to not add a WAN interface to this group.

Selected LAN 
Interfaces

Available LAN 
Interfaces

Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless LAN) in the 

Available LAN 

Interfaces

 list and use the left arrow to move them to the 

Selected LAN Interfaces

 list to add the 

interfaces to this group.

To remove a LAN or wireless LAN interface from the 

Selected LAN Interfaces

, use the right-facing 

arrow.

Automatically 
Add Clients With 
the following 
DHCP Vendor 
IDs

Click 

Add

 to identify LAN hosts to add to the interface group by criteria such as the type of the 

hardware or firmware. See 

Section 15.2.2 on page 197

 for more information.

#

This shows the index number of the rule.

Содержание EX3510-B1


























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды