ZyXEL Communications AMG1302-T10A Скачать руководство пользователя

Страница: 300 / 332

Appendix G Legal Information

AMG1302-T10A User’s Guide

300

THIS LICENSE AGREEMENT IS EXPRESSLY MADE SUBJECT TO ANY APPLICABLE LAWS,

REGULATIONS, ORDERS, OR OTHER RESTRICTIONS ON THE EXPORT OF THE SOFTWARE OR

INFORMATION ABOUT SUCH SOFTWARE WHICH MAY BE IMPOSED FROM TIME TO TIME. YOU

SHALL NOT EXPORT THE SOFTWARE, DOCUMENTATION OR INFORMATION ABOUT THE SOFTWARE

AND DOCUMENTATION WITHOUT COMPLYING WITH SUCH LAWS, REGULATIONS, ORDERS, OR

OTHER RESTRICTIONS. YOU AGREE TO INDEMNIFY ZyXEL AGAINST ALL CLAIMS, LOSSES,

DAMAGES, LIABILITIES, COSTS AND EXPENSES, INCLUDING REASONABLE ATTORNEYS' FEES, TO

THE EXTENT SUCH CLAIMS ARISE OUT OF ANY BREACH OF THIS SECTION 8.

9.Audit Rights

ZyXEL SHALL HAVE THE RIGHT, AT ITS OWN EXPENSE, UPON REASONABLE PRIOR NOTICE, TO

PERIODICALLY INSPECT AND AUDIT YOUR RECORDS TO ENSURE YOUR COMPLIANCE WITH THE

TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT.

10.Termination

This License Agreement is effective until it is terminated. You may terminate this License

Agreement at any time by destroying or returning to ZyXEL all copies of the Software and

Documentation in your possession or under your control. ZyXEL may terminate this License

Agreement for any reason, including, but not limited to, if ZyXEL finds that you have violated any of

the terms of this License Agreement. Upon notification of termination, you agree to destroy or

return to ZyXEL all copies of the Software and Documentation and to certify in writing that all

known copies, including backup copies, have been destroyed. All provisions relating to

confidentiality, proprietary rights, and non-disclosure shall survive the termination of this Software

License Agreement.

11.General

This License Agreement shall be construed, interpreted and governed by the laws of Republic of

China without regard to conflicts of laws provisions thereof. The exclusive forum for any disputes

arising out of or relating to this License Agreement shall be an appropriate court or Commercial

Arbitration Association sitting in ROC, Taiwan if the parties agree to a binding arbitration. This

License Agreement shall constitute the entire Agreement between the parties hereto. This License

Agreement, the rights granted hereunder, the Software and Documentation shall not be assigned

by you without the prior written consent of ZyXEL. Any waiver or modification of this License

Agreement shall only be effective if it is in writing and signed by both parties hereto. If any part of

this License Agreement is found invalid or unenforceable by a court of competent jurisdiction, the

remainder of this License Agreement shall be interpreted so as to reasonably effect the intention of

the parties.

NOTE: Some components of this product incorporate free software programs covered under the

open source code licenses which allows you to freely copy, modify and redistribute the software. For

at least three (3) years from the date of distribution of the applicable product or software, we will

give to anyone who contacts us at the ZyXEL Technical Support ([email protected]), for a

charge of no more than our cost of physically performing source code distribution, a complete

machine-readable copy of the complete corresponding source code for the version of the Programs

that we distributed to you if we are in possession of such.

Содержание AMG1302-T10A













































































































































































































































































































































Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды

ZyXEL Communications AMG1302-T10A, Руководство пользователя

Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды