ZyXEL Communications AMG1302-T10A Скачать руководство пользователя

Страница: 298 / 332

Appendix G Legal Information

AMG1302-T10A User’s Guide

298

HOWEVER, CERTAIN ZYXEL'S PRODUCTS MAY CONTAIN-IN PART-SOME THIRD PARTY'S FREE AND

OPEN SOFTWARE PROGRAMS WHICH ALLOW YOU TO FREELY COPY, RUN, DISTRIBUTE, MODIFY

AND IMPROVE THE SOFTWARE UNDER THE APPLICABLE TERMS OF SUCH THRID PARTY'S

LICENSES ("OPEN-SOURCED COMPONENTS"). THE OPEN-SOURCED COMPONENTS ARE LISTED IN

THE NOTICE OR APPENDIX BELOW. ZYXEL MAY HAVE DISTRIBUTED TO YOU HARDWARE AND/OR

SOFTWARE, OR MADE AVAILABLE FOR ELECTRONIC DOWNLOADS THESE FREE SOFTWARE

PROGRAMS OF THRID PARTIES AND YOU ARE LICENSED TO FREELY COPY, MODIFY AND

REDISTIBUTE THAT SOFTWARE UNDER THE APPLICABLE LICENSE TERMS OF SUCH THIRD PARTY.

NONE OF THE STATEMENTS OR DOCUMENTATION FROM ZYXEL INCLUDING ANY RESTRICTIONS OR

CONDITIONS STATED IN THIS END USER LICENSE AGREEMENT SHALL RESTRICT ANY RIGHTS AND

LICENSES YOU MAY HAVE WITH RESPECT TO THE OPEN-SOURCED COMPONENTS UNDER THE

APPLICABLE LICENSE TERMS OF SUCH THIRD PARTY.

1.Grant of License for Personal Use

ZyXEL Communications Corp. ("ZyXEL") grants you a non-exclusive, non-sublicense, non-

transferable license to use the program with which this license is distributed (the "Software"),

including any documentation files accompanying the Software ("Documentation"), for internal

business use only, for up to the number of users specified in sales order and invoice. You have the

right to make one backup copy of the Software and Documentation solely for archival, back-up or

disaster recovery purposes. You shall not exceed the scope of the license granted hereunder. Any

rights not expressly granted by ZyXEL to you are reserved by ZyXEL, and all implied licenses are

disclaimed.

2.Ownership

You have no ownership rights in the Software. Rather, you have a license to use the Software as

long as this License Agreement remains in full force and effect. Ownership of the Software,

Documentation and all intellectual property rights therein shall remain at all times with ZyXEL. Any

other use of the Software by any other entity is strictly forbidden and is a violation of this License

Agreement.

3.Copyright

The Software and Documentation contain material that is protected by international copyright law,

trade secret law, international treaty provisions, and the applicable national laws of each respective

country. All rights not granted to you herein are expressly reserved by ZyXEL. You may not

remove any proprietary notice of ZyXEL or any of its licensors from any copy of the Software or

Documentation.

4.Restrictions

You may not publish, display, disclose, sell, rent, lease, modify, store, loan, distribute, or create

derivative works of the Software, or any part thereof. You may not assign, sublicense, convey or

otherwise transfer, pledge as security or otherwise encumber the rights and licenses granted

hereunder with respect to the Software. ZyXEL is not obligated to provide any maintenance,

technical or other support for the resultant modified Software. You may not copy, reverse engineer,

decompile, reverse compile, translate, adapt, or disassemble the Software, or any part thereof, nor

shall you attempt to create the source code from the object code for the Software. Except as and

only to the extent expressly permitted in this License, you may not market, co-brand, and private

label or otherwise permit third parties to link to the Software, or any part thereof. You may not use

the Software, or any part thereof, in the operation of a service bureau or for the benefit of any

other person or entity. You may not cause, assist or permit any third party to do any of the

Содержание AMG1302-T10A













































































































































































































































































































































Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды

ZyXEL Communications AMG1302-T10A, Руководство пользователя

Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды