ZyXEL Communications AMG1302-T10A Скачать руководство пользователя

Страница: 270 / 332

Appendix D Wireless LANs

AMG1302-T10A User’s Guide

270

Figure 175

RTS/CTS

When station

sends data to the AP, it might not know that the station

is already using the

channel. If these two stations send data at the same time, collisions may occur when both sets of

data arrive at the AP at the same time, resulting in a loss of messages for both stations.

RTS/CTS

is designed to prevent collisions due to hidden nodes. An

RTS/CTS

defines the biggest

size data frame you can send before an RTS (Request To Send)/CTS (Clear to Send) handshake is

invoked.

When a data frame exceeds the

RTS/CTS

value you set (between 0 to 2432 bytes), the station

that wants to transmit this frame must first send an RTS (Request To Send) message to the AP for

permission to send it. The AP then responds with a CTS (Clear to Send) message to all other

stations within its range to notify them to defer their transmission. It also reserves and confirms

with the requesting station the time frame for the requested transmission.

Stations can send frames smaller than the specified

RTS/CTS

directly to the AP without the RTS

(Request To Send)/CTS (Clear to Send) handshake.

You should only configure

RTS/CTS

if the possibility of hidden nodes exists on your network and

the "cost" of resending large frames is more than the extra network overhead involved in the RTS

(Request To Send)/CTS (Clear to Send) handshake.

If the

RTS/CTS

value is greater than the

Fragmentation Threshold

value (see next), then the

RTS (Request To Send)/CTS (Clear to Send) handshake will never occur as data frames will be

fragmented before they reach

RTS/CTS

size.

Note: Enabling the RTS Threshold causes redundant network overhead that could

negatively affect the throughput performance instead of providing a remedy.

Fragmentation Threshold

is the maximum data fragment size (between 256 and 2432 bytes)

that can be sent in the wireless network before the AP will fragment the packet into smaller data

frames.

A large

Fragmentation Threshold

is recommended for networks not prone to interference while

you should set a smaller threshold for busy networks or networks that are prone to interference.

If the

Fragmentation Threshold

value is smaller than the

RTS/CTS

value (see previously) you

set then the RTS (Request To Send)/CTS (Clear to Send) handshake will never occur as data frames

will be fragmented before they reach

RTS/CTS

size.

Содержание AMG1302-T10A













































































































































































































































































































































Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды

ZyXEL Communications AMG1302-T10A, Руководство пользователя

Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды