ZyXEL Communications AMG1302-T10A Скачать руководство пользователя

Страница: 18 / 332

Chapter 1 Introduction

AMG1302-T10A User’s Guide

1.6 LEDs (Lights)

The following graphic displays the labels of the LEDs.

Figure 3

LEDs

None of the LEDs are on if the Device is receiving power.

Refer to the Quick Start Guide for information on hardware connections.

Table 1

LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

POWER

Green

The Device is receiving power and ready for use.

Blinking

The Device is self-testing.

Red

The Device detected an error while self-testing, or there is a device

malfunction.

Off

The Device is receiving power.

LAN 1-4

Green

The Device has an Ethernet connection with a device on the Local

Area Network (LAN).

Blinking

The Device is sending/receiving data to /from the LAN.

Off

The Device does have an Ethernet connection with the LAN.

WPS/WLAN

Green

The wireless network is activated.

Blinking

The Device is communicating with other wireless clients.

Red

Blinkin

g T

he Device is setting up a WPS connection.

Off

The wireless network is activated.

DSL

Green

The DSL line is up.

Blinking

The Device is initializing the DSL line.

Off

The DSL line is down.

INTERNET

Green

The Device has an IP connection but no traffic.

Your device has a WAN IP address (either static or assigned by a

DHCP server), PPP negotiation was successfully completed (if used)

and the DSL connection is up.

Blinking

The Device is sending or receiving IP traffic.

Red

The Device attempted to make an IP connection but failed. Possible

causes are no response from a DHCP server, no PPPoE response,

PPPoE authentication failed.

Off

The Device does have an IP connection.

Содержание AMG1302-T10A













































































































































































































































































































































Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды

ZyXEL Communications AMG1302-T10A, Руководство пользователя

Результаты поиска

Содержание AMG1302-T10A

Отзывы:

Похожие инструкции для AMG1302-T10A

Бренды по названию

Популярные бренды