ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 88 / 435

AAM1212-51/53 Series User’s Guide
88 Chapter 9 User Account
9.2 Authentication Screen
Use this screen to set up the authentication policies and settings by which administrators can
access the AAM1212.
To open this screen, click Basic Setting , User Account , Authentication .
Figure 42 Authentication
Privilege Select a privilege level to determine which screens the administrator can use.
There is a high, medium or low privilege level for each command.
Select
high to allow the administrator to use all commands including the lower
privilege commands. High privilege commands include things like creating
administrator accounts, restarting the system and resetting the factory defaults.
Select
middle to allow the administrator to use middle or low privilege
commands.
Select
low to allow the administrator to use only low privilege commands. Low
privilege commands are read only.
Add Click Add to save your changes to the AAM1212’s volatile memory. The
AAM1212 loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring the fields again.
Index This field displays the number of the user account. Click an account’s index
number to use the top of the screen to edit it.
Enable This field displays a “V “ if you have the administrator account turned on. It
displays a “-“ if the administrator account is turned off.
Name This field displays the administrator account’s user name.
Privilege This field displays the administrator account’s access level (high, middle or low).
Select Select this check box and click the Delete button to remove an administrator
account.
Delete Select an administrator account’s check box and click this button to remove the
administrator account.
Cancel Click Cancel to start configuring the screen afresh.
Table 13 User Account (continued)
LABEL DESCRIPTION