ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 404 / 435

AAM1212-51/53 Series User’s Guide
404 Chapter 53 Virtual Channel Management
This command clears TLS settings for the PVC.
53.9.2 TLS PVC Set Command
Syntax:
ras> adsl tlspvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]>
<pvid> <priority>
where
This command sets the second VLAN tag to add to the packets from the PVC.
The following example adds VLAN tag
100
to traffic using the
DEFVAL
ATM profile on PVC
(
1/33
) on port
2
.
Figure 289 TLS PVC Set Command Example
53.9.3 TLS PVC Show Command
Syntax:
ras> adsl tlspvc show <portlist> [<vpi> <vci>]
<vpi> =
The VPI of the TLS PVC.
<vci> =
The VCI of the TLS PVC.
<portlist> =
The port number of the TLS PVC. You can specify a single
DSL port <1>, all DSL ports <*> or a list of DSL ports <1,3,5>.
You can also include a range of ports <1,5,6~10>.
<vpi> =
The VPI of the TLS PVC.
<vci> =
The VCI of the TLS PVC.
<DS vcprofile =
Assign a VC profile to use for this channel’s downstream traffic
shaping.
[,US
vcprofile]> =
Assign a VC profile to use for policing this channel’s upstream
traffic. The AAM1212 does not perform upstream traffic
policing if you do not specify an upstream VC profile.
<pvid> =
1 – 4094; the (second) VLAN Identifier to add to Ethernet
frames that the system routes using this PVC.
<priority> =
Set the IEEE 802.1p priority (0~7) to add to the traffic that uses
this PVC.
ras> adsl tlspvc set 2 1 33 DEFVAL 100 0