ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 386 / 435

AAM1212-51/53 Series User’s Guide
386 Chapter 53 Virtual Channel Management
53.4.1 PPVC Set Command
Syntax:
ras> adsl ppvc set <portlist> <vpi> <vci> <encap> <pvid> <priority>
where
This command creates a PPVC.
The following example creates a PPVC with VPI 8 and VCI 35 for port 5. The PPVC uses llc
encapsulation and default VID 25. Any frames received without an IEEE 802.1p priority tag
will be assigned a priority of 3. The AAM1212 uses this PVC channel internally. This PVC is
not needed on the subscriber’s device.
53.4.2 PPVC Member Set Command
Syntax:
ras> adsl ppvc member set <portlist> <vpi> <vci> <member vpi> <member vci>
<DS vcprofile[,US vcprofile]> <level>
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
<vpi> =
The VPI setting can be 0 to 255.
<vci> =
The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to 65535
if the vpi is not 0. This PVC channel is for internal use. The
operator does not need to create this PVC on the subscriber’s
device (the CPE).
<encap> =
The type of encapsulation: llc, vcmux
<pvid> =
Type a PVID (Port VLAN ID) to assign to untagged frames
received on this PPVC.
<priority> =
This is the priority value (0 to 7) to add to incoming frames
without a (IEEE 802.1p) priority tag.
Figure 265 PPVC Set Command Example
ras> adsl ppvc set 5 8 35 llc 25 3