ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 226 / 435

AAM1212-51/53 Series User’s Guide
226 Chapter 34 Access Control
Figure 118 Service Access Control
The following table describes the labels in this screen.
34.6 Remote Management Screen
Use this screen to configure the IP address ranges of trusted computers that may manage the
AAM1212.
To open this screen, click Advanced Application , Access Control , Secured Client .
Table 77 Service Access Control
LABEL DESCRIPTION
Return Click Return to go back to the previous screen.
Services Services you may use to access the AAM1212 are listed here.
Active Select the Active check boxes for the corresponding services that you want to
allow to access the AAM1212.
Server Port For Telnet, FTP or web services, you may change the default service port by
typing the new port number in the Server Port field. If you change the default
port number then you will have to let people (who wish to use the service) know
the new port number for that service.
Apply Click Apply to save your changes to the AAM1212’s volatile memory. The
AAM1212 loses these changes if it is turned off or loses power, so use the
Config Save link on the navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.