ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 398 / 435

AAM1212-51/53 Series User’s Guide
398 Chapter 53 Virtual Channel Management
The following example removes a domain for a CPE device is connected to DSL port 1 on the
AAM1212 and the 2684 routed mode traffic is to use the PVC identified by VPI 8 and VCI 35.
The CPE device’s LAN IP address is 10.10.10.10 and uses a subnet mask of 255.255.255.0.
This includes the CPE device’s LAN IP addresses and the IP addresses of the LAN computers.
53.7.11 RPVC ARP Agingtime Set Command
Syntax:
ras> adsl rpvc arp agingtime set <sec>
where
This command configures how long the device stores the IP addresses of CPE devices using
2684 routed mode in the Address Resolution Protocol table.
The following example sets the device to store the IP addresses 2684 routed mode gateways in
the Address Resolution Protocol table for 500 seconds.
53.7.12 RPVC ARP Agingtime Show Command
Syntax:
ras> adsl rpvc arp agingtime show
This command displays how long the device stores the IP addresses of 2684 routed mode
gateways in the Address Resolution Protocol table.
The following is an example.
Figure 281 RPVC Route Delete Command Example
ras> adsl rpvc route delete 1 8 35 10.10.10.1/24
<sec> =
The number of seconds (10~10000) the device is to keep the
Address Resolution Protocol table’s entries of IP addresses of
2684 routed mode gateways. Use 0 to disable the aging time.
Figure 282 RPVC ARP Agingtime Command Example
ras> adsl rpvc arp agingtime set 500
Figure 283 RPVC ARP Agingtime Show Command Example
ras> adsl rpvc arp agingtime show
rpvc aging time (sec): 500