ZyXEL Communications AAM1212-51, Руководство пользователя

Страница: 384 / 435

AAM1212-51/53 Series User’s Guide
384 Chapter 53 Virtual Channel Management
53.3.1 PVC Show Command
Syntax:
ras> adsl pvc show [portlist] [<vpi> <vci>]
where
This command allows you to display the PVC parameters of the specified DSL port(s) or all of
the DSL ports if you do not specify any.
53.3.2 PVC Set Command
Syntax:
ras> adsl pvc set <portlist> <vpi> <vci> <super |vid = 1..4094 <priority>>
<DS vcprofile[,US vcprofile]>
where
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
[<vpi> <vci>] =
The VPI and VCI of an individual PVC.
<portlist> =
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~10>.
<vpi> =
The VPI setting can be 0 to 255.
<vci> =
The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to 65535
if the vpi is not 0.
<super |vid =
Enable the super channel option to allow a channel forward
frames belonging to multiple VLAN groups (that are not
assigned to other channels). The AAM1212 forwards frames
belonging to VLAN groups that are not assigned to specific
channels to the super channel. The super channel functions in
the same way as the channel in a single channel environment.
One port can have only one super channel.
The default VID (1 to 4094). Each PVC must have a unique
VID since the AAM1212 forwards traffic back to the
subscribers based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the AAM1212 forwards traffic back
to the subscribers based on the VLAN ID).