manualshive.com logo in svg

ZyXEL Communications 2864 Series, Руководство пользователя, Страница: 40 / 267

Поделиться
Скачать
ZyXEL Communications 2864 Series Скачать руководство пользователя страница 40

3–4

Front Panel Switches

There are two toggle switches on the Elite 2864 front panel.

D/V (DATA/VOICE)

A toggle switch that switches the modem on-line (off-hook DATA mode) or off-line 
(on-hook, Voice or Talk mode, the telephone set is connected to the line). The OH 
LED indicator will be turned on and off by this switch. If S35 bit 4 is set 
(

S35.4=1

), pressing this switch will make the modem go off-hook and dial the de-

fault number.

O/A (ORG/ANS)

A toggle switch that determines the mode, Originate or Answer, the modem will op-
erate in, if made go off-hook by pressing the D/V switch. The ORG LED indicator 
will be turned on and off by this switch.

Elite 2864 Rear Panel

Fig. 3.2 shows the Elite 2864 rear panel.

Note:

This switch only determines modem operation mode if made go off-
hook manually. The 

ATD

 or 

ATA

 command will automatically de-

termine the mode.

Warning:

If this switch is pressed while the modem is turned on, the modem 
will jump into a special kernel program which allows the user to up-
load a new firmware into the modem from a connected DTE. If this 
is not what you intended, turn off the modem and then turn it on 
again to return the modem to normal operation.

Fig. 3.2: The Elite 2864 rear panel

POWER

JACK

        

      LINE       PHONE

  DTE

       Serial

          Parallel

Содержание 2864 Series












































































































































































































































































Отзывы:

Нет отзывов