manualshive.com logo in svg

ZyXEL Communications 2864 Series, Руководство пользователя, Страница: 36 / 267

Поделиться
Скачать
ZyXEL Communications 2864 Series Скачать руководство пользователя страница 36

2–10

Automatic Redial / Call Hunting

Most modems will automatically redial a telephone number several times if a con-
nection could not be established on the first try. The modems of the 2864 series also 
offer the ability to do cyclic redials of a set of up to 10 different numbers.

Modem Approval and Legal Matters

In some countries the PTT authorities require modems to conform to a set of spe-
cific rules, e.g., transmitting signal level limitation, line circuit isolation, or restric-
tion of the behavior of modems during automatic redial. Modems must receive an 
official approval within those countries to be used legally. ZyXEL provides specifi-
cally designed models which have received such an approval. Check your local dis-
tributor to find out details about approved models.

Содержание 2864 Series












































































































































































































































































Отзывы:

Нет отзывов