ZyXEL Communications 2864 Series Скачать руководство пользователя страница 244

Страница: 244 / 267

Glossary-8

ter:

Old French word for three.

Terminal Equipment:

A computer running terminal software is used as terminal

equipment in modem connections.

Terminal program:

A program which emulates the operation of a hardware terminal

on a computer's screen and keyboard.

Token:

A token is a reencoding of information in less bits; basically an abbreviation.

Transfer mode:

Data can be transferred either synchronouosly or asynchronously.

Transfer rate:

The speed at which the data bits are effectively transferred.

UART:

Universal Asynchronous Receiver and Transmitter; a special IC chip which

controls the serial port. Different models are available for PCs. Models with an in-
ternal buffer usually allow higher transfer rates.

: The ITU-TSS V.-standards describe data transfer via telephone lines.

Western

jack:

Telephone wall outlet connector used in the USA and other countries.

: The ITU-TSS X.-standards describe data transfer in public data networks.

XModem:

A widely used, though somewhat aged, file transfer protocol. The use of

128 byte data blocks severely limits the achievable throughput.

XON/XOFF:

Software flow control. The data flow is stopped by sending ASCII char-

acter Control-Q (dec. 17; hex $11) and restarted by Control-S (dec. 19; hex $13).

YModem:

A file transfer protocol which uses data blocks of 1 Kbyte and transfers

filenames and more than one file in one transfer.

ZModem:

A file transfer protocol with variable block size, reinitiation of aborted

transfers and transfer of several files in one transfer along with file (and path) names.

Содержание 2864 Series












































































































































































































































































Результаты поиска

Содержание 2864 Series

Отзывы:

ZyXEL Communications 2864 Series, Руководство пользователя, Страница: 244 / 267

Результаты поиска

Содержание 2864 Series

Отзывы: