manualshive.com logo in svg

ZyXEL Communications 2864 Series, Руководство пользователя, Страница: 39 / 267

Поделиться
Скачать
ZyXEL Communications 2864 Series Скачать руководство пользователя страница 39

3–3

The following four indicators have different meanings depending on whether the 
modem is connected to a DTE (computer or terminal) through either of the parallel 
or serial interfaces (SP or PCP is ON, DTE mode) or whether the modem is con-
nected to a printer through the parallel port interface (PRP is ON, printer mode).

AA

Auto Answer indicator; lights up when the modem is in auto answer 
mode; flashes when modem rings. 

CD

Carrier Detect indicator; lights up when a valid carrier is detected 
present on the line.

TXD

Transmit Data indicator; lights up when your DTE/computer trans-
mits data to the modem.

RXD

Receive Data indicator; lights up when your DTE/computer receives 
data from the modem.

DTR

POL

DTE mode:

 Data Terminal Ready indicator; lights up when the DTE 

or computer indicates that it is ready for communication by raising 
the corresponding RS232 signal.

Printer mode:

 Printer On Line indicator; indicates the status of the 

printer’s "Select" (SLCT) signal. It lights up when the printer is se-
lected and is available for data transfer.

DSR

PSL

DTE mode:

 Data Set Ready indicator; lights up when modem is 

ready for communication.

Printer mode:

 Printer SeLect signal; indicates the signal status of 

"-Select In" from modem to printer. It lights up when printer is ena-
bled to input data.

RTS

PPE

DTE mode:

 Request To Send indicator; indicates the signal status of 

RS232 signal RTS from DTE. RTS is used for hardware flow control 
in asynchronous data transmission.

Printer mode:

 Printer Paper End indicator; lights up when the print-

er is out of paper. It indicates the signal status of "PE" from the print-
er.

CTS

PER

DTE mode:

 Clear To Send indicator; lights up when modem can ac-

cept data for transmission. It indicates the signal status of RS232 
signal CTS.

Printer mode:

 Printer ERror indicator; lights up when an error con-

dition exists in the printer, e.g., out ot paper or not on-line. It indi-
cates the signal status of "-Error" from the printer.

Содержание 2864 Series












































































































































































































































































Отзывы:

Нет отзывов