manualshive.com logo in svg

ZyXEL Communications 2864 Series, Руководство пользователя, Страница: 195 / 267

Поделиться
Скачать
ZyXEL Communications 2864 Series Скачать руководство пользователя страница 195

16–19

•

AT+V

TD

?

The DCE returns the current beep duration and pause interval setting followed by 
the 

OK

 result code.

•

AT+V

TD

=?

The DCE returns the permitted values for the beep duration and pause interval. 
The response is:

(0-255), (0-255)
OK

•

AT+V

DD

=<

dds

>,<

ddi

>

This command causes the DCE to set the DTMF detection threshold and the re-
quired period of continuous DTMF tone detection before the DCE can report a 
DTMF event. 

<dds> :  The DCE uses this subparameter to select the sensitivity threshold 

level of DTMF detection; a lower value of this subparameter implies 
that the DTE wants the DCE to detect the DTMF tone more 
sensitively. The range of the threshold <

dds

> is from 0 to 15. A 

value of zero disables the DTMF detection. The default value is 5.

<ddi> :  The required period of continuous DTMF tone detection before the 

DCE can report a DTMF event. A value of zero disables the DTMF 
detection. The range of the interval <

ddi

> is from 0 to 255 in units 

of 5 ms. The default value is 8 (40 ms).

The DCE returns the 

OK

 result code if the DCE accepts this command, or it re-

turns the 

ERROR

 result code if any of the <

dds

> or <

ddi

> values is out of range.

•

AT+V

DD

?

This command causes the DCE to report the current <

dds

> and <

ddi

> settings. 

The format of the response is:

<dds>,<ddi>
OK

•

AT+V

DD

=?

This command causes the DCE to report the permitted range of <

dds

> and 

<

ddi

>. The response is:

(0-15),(0-255)
OK

•

AT+V

SY

=<

timer

>

This command sets the DCE's voice recording resync timer. The range of <timer> is 
from 0 to 255 in 50ms units. The default value is 0 (disable). A value of 0 disables re-
sync generation. In Voice Receival Mode, the speech coder is reset and generates a resync 
symbol - <DLE><DC2> in the voice data according to this timer interval.

Содержание 2864 Series












































































































































































































































































Отзывы:

Нет отзывов