manualshive.com logo in svg

ZyXEL Communications 2864 Series, Руководство пользователя, Страница: 141 / 267

Поделиться
Скачать
ZyXEL Communications 2864 Series Скачать руководство пользователя страница 141

13–3

Local profile modification is done by loading this profile as the active settings and 
then modifying and saving the active settings back to the profile. Then the connec-
tion is reestablished and the profile is transmitted to the remote modem.

Reading a remote profile 

b

 into a local profile 

a

 is done by the command:

AT*Rab

whereby

Return the modems to on-line status again. The local modem can upload (write) its 
profile to the remote modem's profile and have the remote modem reset from the 
new profile. This is done with the command:

AT*Wab

whereby

The remote profile read and write commands - 

*Rab

 and 

*Wab

 - only work in the 

on-line condition. The connection speed and mode do not matter. The remote mo-
dem must be set to accept remote configuration by executing the 

AT*F1

 com-

mand. The 

AT*F0

 command will set the modem up to deny remote configuration 

requests. Because the modem uses the remote digital loopback mode to request re-
mote configuration information, the remote digital loopback request must also be 
granted (

AT&T4

) on the remote modem to accept the remote configuration re-

quest. 

Remote configuration can also be activated from an LCD (also includes rack-
mount) model's LCD panel. The remote modem is set to grant remote configura-
tion by setting bit 0 of S-register 

S36

. For the local modem, set 

S36b1

 to 1 for 

the read operation or to 0 for the write operation. Set 

S37b0-3

 to the remote pro-

file number and bits 4-7 to the local profile number. After the S-register settings are 
done, activate the remote configuration operation by going to the 

DIAGNOSTIC

 

menu and activating the 

REMOTE CONFIGURATION

 submenu.

Batch mode remote configuration is a convenient feature allowing you to preconfig-
ure a remote modem in one of the local modem's user profiles and send it to the re-

a=0-3

Local user profile number.

b=0-3

Remote user profile number.

b=4

Remote active configuration.

b=5

Remote factory default.

a=0-3

Local user profile number.

a=4

Local active configuration.

a=5

Local factory default.

b=0-3

Remote user profile number.

Содержание 2864 Series












































































































































































































































































Отзывы:

Нет отзывов