45 / 138
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 50000TL-60000TL-V1
Rev. 1.1 15/03/2021
•
Connect the phase S cable to the terminal labelled “S”, tighten the wire using a screwdriver;
•
Connect the phase T cable to the terminal labelled “T, tighten the wire using a screwdriver;
•
Connect the blue (neutral) cable to the terminal labelled “N”, tighten the wire using a screwdriver.
Figure 29 - Connecting the AC output cables (3)
4)
Secure the clamping cable gland by turning it clockwise; make sure that all the wires are securely
connected
4.5.
Connecting the communication cables
The 3PH 50000TL-60000TL-V1 inverters have two communication interfaces, the RS485 interface and Wi-Fi
interface, as shown in the figure below.
Figure 30 – Bottom view of the 3PH 50000TL-60000TL-V1 inverter
