137 / 138
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 50000TL-60000TL-V1
Rev. 1.1 15/03/2021
10.4.9.
Local monitoring
The datalogger makes it possible to obtain an additional monitoring system (
local monitoring
), which can
be used locally on a web page (therefore, also without an internet connection) and accessed from any device
present in the same local network as the datalogger.
10.4.9.1.
Requirements for installation of local monitoring
In order to install the local monitoring system on the datalogger, the customer must ensure that:
The datalogger is connected to the local network and to the internet (the internet connection is only
required during installation and configuration of the local monitoring system).
A static address (to be provided by the customer) with gateway and subnet mask is available for viewing
the page locally.
10.4.9.2.
Features of local monitoring
After installation and configuration, local monitoring makes it possible to monitor the fundamental
parameters of the photovoltaic system, even without an internet connection, from any device connected to
the same local network.
In particular, it is possible to monitor the power and energy of the inverters and the storage systems over
the last 7 days. It is also possible to view alarms, and other information such as temperature, peak daily
power, CO
2
gains and savings.
Below is an example of a local monitoring page.
Figure 103: Example of local monitoring page
