104 / 138
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
User’s Manual 3PH 50000TL-60000TL-V1
Rev. 1.1 15/03/2021
10.2.
Ethernet adapter
10.2.1.
Installation
Installation must be carried out for all inverters compatible with the adapter. However, the procedure is
quicker and easier as there is no need to open the front cover of the inverter.
Proper operation of the device requires the presence of a modem correctly connected to the network and in
operation in order to achieve stable data transmission from the inverter to the server.
In order to monitor the inverter, the RS485 communication address must be set to 01 directly from the
display.
Installation tools:
Cross screwdriver
Ethernet adapter
Shielded network (Cat. 5 or Cat. 6) crimped with RJ45 connectors
1)
Switch off the inverter following the procedure described in this manual.
2)
Remove the cover for accessing the Wi-Fi/Eth connector on the bottom of the inverter by unscrewing
the two cross-head screws (a), or by unscrewing the cover (b), depending on the inverter model, as
shown in the figure.
(a)
(b)
Figure 63 – Port of the Ethernet adapter
