Zubler Vario Press 100, Руководство по эксплуатации

Страница: 22 / 56

Vario Press 100 Operations Manual
VP_0206E 22
1. Locate the door on the right side of the furnace. Remove the two thumbscrews securing the door
in place, and remove the door.
2. With the door removed, a connector and two small blue cubes can be seen in the opening. The
cubes each have a small screw near the top.
3.
Turn the screw in the left cube (nearest the front of the furnace) to adjust volume. This is a multi-
turn potentiometer, so several revolutions of the screw may be necessary. Counter-clockwise will
reduce the volume, clockwise will raise the volume.
4.
Turn the screw in the right cube (nearest) the rear of the furnace) to adjust contrast. This is a
multi-turn potentiometer, so several revolutions of the screw may be necessary.
Testing Your Furnace
The
Vario Press 100 is capable of performing several tests to aid in diagnosing the furnace should a
problem occur. Your dealer’s technician may ask you to run one or more of these tests and
communicate the information they provide. The tests include a vacuum test, a muffle test, a table up
test, a table down test, and a muffle hour reading. The muffle hour reading is incremented by 1 for
each hour the muffle temperature is above 600º C.
1.
Press the “ Special Functions ” button. Turn the Silver Select Knob until the display reads TEST
FURNACE.
2.
Press the “Next” button .
Program Printer
Port
Volume control
LCD Contrast