Zubler Vario Press 100, Руководство по эксплуатации

Страница: 21 / 56

Vario Press 100 Operations Manual
VP_0206E 21
Furnace Calibrations
IMPORTANT: Your furnace has been calibrated at the factory. State of the art electronic
components have been used in its manufacture. The furnace should maintain its calibration for many
years without need to repeat these calibration functions.
Transferring Programs to Other Furnaces
The
Vario Press 100 has been designed to make it very easy to copy your programs to other furnaces.
This feature is especially helpful if you have several furnaces. You need to program only one furnace,
then use a “Red” box to transfer the programs to your other furnaces. Contact your dealer to obtain a
“Red” box and follow these directions to transfer your programs:
1.
Locate the printer/program port door on the right side of the furnace. Remove the two
thumbscrews securing the door in place, and remove the door.
2.
With the printer/program port door removed, a connector can be seen in the opening. Plug the
“Red” box into the connector.
3.
Press the “Special Functions” button. Turn the Silver Select Knob to the left until the display
reads PROGRAMS BOX. Make sure that the arrow is pointing to the word “Box”.
4.
Press the “Next” button.
5.
The display will read “SENDING NOW… “ When the transfer is finished, remove the “Red”
box, and take it to the furnace that you want to load the programs into.
Note: Any porcelain names or programs that are on the second furnace before the transfer will
be replaced.
6.
Plug the “Red” box into the second furnace. Press the “Special Functions” button. Turn the
Silver Select Knob to the left until the display reads PROGRAMS

BOX. Make sure the arrow
is pointing to the word “Programs”.
7.
Press the “Next” button .
8.
The programs will be copied to the second furnace. When the transfer is complete, remove the
“Red” box.
9.
Repeat steps 5 and 6 to copy the programs to other furnaces.
Adjusting Speaker Volume and Display Contrast
This feature allows you to adjust the volume of the warning and alert speaker inside the furnace. The
display contrast is adjusted in the same manner.