Zubler Vario Press 100, Руководство по эксплуатации

Страница: 18 / 56

Vario Press 100 Operations Manual
VP_0206E 18
In the procedure for changing names that follows, please be aware of the following items:
• Any number, letter, space, or special character may be selected. Only four characters per name
can be used.
• An underline will indicate the current character position.
• Pressing the “ Next ” button moves underline to next position.
• Pressing the “ Last ” button moves underline to last position.
Procedures:
1. Press the
“Special Functions”
button
.
Turn the
Silver Select Knob
until the display reads
PORCELAIN NAMES.
2.
Press the “Next” button . The furnace will display the first two porcelain names on the second
line. The underline (cursor) will be under the first character of the first porcelain name.
3.
Turning the Silver Select Knob will cause the character above the underline (cursor) to cycle
through the numbers, letters, and other characters. When the character you wish to use in this
position has been reached,
press the “Next” button.
4.
The underline will move to the next character. Repeat the last step for each character position.
Should you desire to return to a previous character,
press the “Last” button until the underline is
under the desired character.
5.
When the “
Next
” button is pressed and the last character in the porcelain name has been selected,
the underline will move to the first character in the next name. Repeat the above procedure for
each of the remaining porcelain names you wish to change.
6.
Press the “Next” button to continue after the last character of the fourth porcelain name has been
selected.
Adjusting Calibration to Match Your Porcelain
Porcelain fires according to energy, temperatures and time. Due to differences in insulation packages,
all porcelain furnaces fire slightly different. Even porcelain furnaces from the same manufacturer can
fire porcelains at slightly different temperatures. The
Vario Press 100 furnace addresses this problem
by allowing you to customize the calibration. This feature can be used to adjust your furnace, or to
adjust multiple furnaces to fire identically.
The
Vario Press 100 furnace comes with a “ Certificate of Temperature Calibration .” This
certificate shows the actual temperature in the muffle for several temperatures as displayed by the
furnace. Special instrumentation is used at the factory to achieve these close calibration tolerances.
Adjusting the calibration as described here will allow you to globally adjust the temperature for all
programs instead of one.
The
Vario Press 100 calibration can be adjusted for normal high fusing porcelains and for the new
low fusing porcelains. Use the low fusing adjustments if your porcelain fires at or below 800º C/
1470º F. Use the high fusing adjustments if your porcelain fires above 800º C/1470º F. These
adjustments do not affect each other, so both adjustments can be used if you fire both types of
porcelain..