Zte ZXR10 8900E series Скачать руководство пользователя | Manualshive

Страница: 57 / 132

background image

ZXR10 8900E series Core Switch Product Description

ZTE Confidential Proprietary

© 2013 ZTE CORPORATION. All rights reserved.

47

other system remotely detects the BFD control message. In query mode, the system
transmits and detects the BFD control message.

Asynchronous mode: In asynchronous mode, two systems periodically sends BFD
control message to each other. If one receives no BFD control message from the other in
detection time, it will be announced that the session is down.

Query mode: In query mode, supposed that each system has an independent approach
to confirm that it is connected to other systems. Once a BFD session is created, the
system will stop sending BFD control message unless a system needs to explicitly verify
the connectivity. If it needs to explicitly verify the connectivity, the system sends a short
BFD control message. If it receives no message returned in detection time, it will be
announced that the session is down. If a message is returned, the protocol will remain
silent again.

Echo function: One system sends a series of BFD echo messages, and the other system
loops them back via its forwarding path. If several continuous echo messages are not
received, it will be announced that the session is down. The echo function can work with
the above two detection modes.

ZXR10 8900E support BFD for static route OSPF dynamic route and VRRP to fulfill fast
convergence. It combines BFD and FRR technologies and provides fast fault detection
mechanism to implement fast rerouting.

3.7.2.2

OAM detection

OAM offer a wide variety of detection means of network fault discovery. It consists of
Ethernet OAM and MPLS OAM. Ethernet OAM detects and discover Ethernet link fault,
and MPLS OAM provides defect detection tool and protection switching mechanism for
MPLS network. For details, refer to Section 3.5. OAM message detection serves to detect
link status, node status and tunnel connectivity. It can detect the fault while triggering the
protection switching.

3.7.2.3

SQA

SQA (Service Quality Analyzer) sends the test message to analyze network performance,
network service and QoS, and provide the user with network performance and QoS
parameters, e.g., delay jitter, TCP connection delay, FTP connection delay and file
transport rate. SQA helps the user to know current network status, and detect and
position the fault to improve network management initiative and controllability .

ZXR10 8900E supports many kind of detections include ICMP-echo, DHCP, DNS, FTP,
HTTP, UDP-jitter, SNMP, TCP, UDP-echo, Voice and DLSw, and associates detection
result to VRRP function, as shown in Figure 3-14.

«
...
55
56
57
58
59
...
»

Содержание ZXR10 8900E series





































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZXR10 8900E series

Бренд: Aastra Страницы: 2

Бренд: Hama Страницы: 10

Бренд: Ubiquiti Страницы: 50

Бренд: TP-Link Страницы: 2

PBE-5AC-300-ISO

Бренд: Ubiquiti Страницы: 28

Бренд: SurfControl Страницы: 2

Бренд: Active Communications Страницы: 10

Бренд: XAVI Technologies Corp. Страницы: 63

Бренд: Ubiquiti Страницы: 28

Бренд: ZyXEL Communications Страницы: 66

Бренд: Digisol Страницы: 73

Бренд: Valcom Страницы: 3

OfficeConnect 3CXSH654B

Бренд: 3Com Страницы: 52

Бренд: Hameg Страницы: 46

Бренд: Caimore Страницы: 79

Бренд: Tripp Lite Страницы: 2

Бренд: Tripp Lite Страницы: 2

PMP/PTP 450 Series

Бренд: Cambium Networks Страницы: 155

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды