Zte ZXR10 8900E series Скачать руководство пользователя | Manualshive

Страница: 21 / 132

background image

ZXR10 8900E series Core Switch Product Description

ZTE Confidential Proprietary

© 2013 ZTE CORPORATION. All rights reserved.

11

segregated within the service-provider infrastructure even when they appear to be on the
same VLAN. Selective VLAN expand the VLAN space by using a VLAN-in-VLAN
hierarchy. The VLAN number can extend to 4094*4094. Another layer of 802.1Q tag
(SP-VLAN ID) is added to the 802.1Q-tagged (CE-VLAN ID) packets that enter the
service-provider network.

Some service streams require SVLAN also supports the transparent transport of VLAN
service that the packet passes the switch without any interference, namely, the number
and value of the tags remain unchanged.

SVLAN can work with VLAN translation to flexibly process both inner and outer tags. For
details, refer to the chapter “VLAN translation”. In addition, SVLAN can fulfill the 802.1P
CoS priority mapping of outer tag and inner tag.

ZXR10 8900E supports traditional SVLAN configuration and VFP-based SVLAN
configuration. The latter can add the tags based on traffic type.

3.1.3

Link aggregation

Link aggregation means that physical links with the same transport medium and transport
rate are bound and logically look like a link. Link aggregation greatly increases the
bandwidth of peer physical links between switches or between switch and server.
Therefore, it is an important technology to increase link bandwidth and create link
transmission resilience and redundancy. Link aggregation can create
several-multiple-gigabit connection in GE, and logic link with faster transport in FE.
Meanwhile, link aggregation has good protection. When a fault occurs, the traffic in the
trouble links will switch quickly to normal links of the aggregation. Link aggregation can
increase the bandwidth and share traffic load.

ZXR10 8900E supports static and dynamic link aggregation of FE, GE, and 10G ports as
well as cross-card and cross-equipment link aggregation. Logic port from ZXR10 8900E
link aggregation is called smart group which can work as ordinary port.

3.1.3.1

Static aggregation

Static Trunk can manually add several physical ports into Trunk group to form one logic
port, but it is difficult to observe the status of link aggregation port.

ZXR10 8900E configures link aggregation functions according to the following principle
which is also applied to LACP:



128 Trunk groups can be configured, and each Trunk group includes at most 8
member ports.



Support cross-interface board aggregation. Member ports may be in any interface
board, but the selected port must work in the full-duplex mode, and working rates
must be consistent.

«
...
19
20
21
22
23
...
»

Содержание ZXR10 8900E series





































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZXR10 8900E series

ShareCenter Quattro DNS-345

Бренд: D-Link Страницы: 40

ShareCenter Quattro DNS-345

Бренд: D-Link Страницы: 4

ShareCenter DNS-343

Бренд: D-Link Страницы: 12

AirPlus G DWL-G710

Бренд: D-Link Страницы: 5

MYDLINK DNR-322L

Бренд: D-Link Страницы: 4

mydlink DNR-312L

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 88

Бренд: H3C Страницы: 33

S5500-SI Series

Бренд: H3C Страницы: 1217

Бренд: 3Com Страницы: 2443

Бренд: H3C Страницы: 3

Бренд: H3C Страницы: 4

Бренд: H3C Страницы: 22

Бренд: H3C Страницы: 3

COMSPHERE 3800 Series

Бренд: Paradyne Страницы: 88

COMSPHERE 3800PLUS

Бренд: Paradyne Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды