Zte ZXDSL 9210 (V3.1) Скачать руководство пользователя страница 93

Страница: 93 / 182

Chapter

Erro! Estilo não definido.

5-7

Save, clear, and read configuration information.

This function is used to save configuration information in NVM, clear and read

configuration information from NVM.

Read all configuration information from NVM when the SCBF is started.

Read all configuration information from NVM to the memory when the SCBF is

started, and send it to related modules.

Send configuration information to the line interface board when a line interface

board is started.

When the line interface board is started, the configuration module will send a

message requesting this module to send the configuration information of this

line interface board. When this module receives such a request, it will read the

configuration information of this line interface board from the memory, and

sends it to the line interface board which sends this request.

2) Configuration module on the line interface board

The configuration module on the line interface board requests the configuration

module on the SCBF to send configuration information when the line interface

board is started.

The configuration module on the line interface board forwards the configuration

information received from the SCBF to related modules.

When the SCBF encounters active/standby switchover, the configuration module

on the line interface board obtains data again from the SCBF, compares the data

with original data, and performs settings of different data according to new data.

2. Control

module

Both the SCBF and line interface board have control modules, which complete

respective tasks.

1) Control module on the SCBF

The control module on the SCBF completes the following 2 tasks:

System control part

The system control part coordinates the operating relationship between various

subsystems, and controls the initialization of the whole system. Besides, it is

Содержание ZXDSL 9210 (V3.1)























































































































































































Результаты поиска

Содержание ZXDSL 9210 (V3.1)

Отзывы:

Похожие инструкции для ZXDSL 9210 (V3.1)

Бренды по названию

Популярные бренды

Zte ZXDSL 9210 (V3.1), Техническое руководство

Результаты поиска

Содержание ZXDSL 9210 (V3.1)

Отзывы:

Похожие инструкции для ZXDSL 9210 (V3.1)

Бренды по названию

Популярные бренды