Zte ZXDSL 9210 (V3.1) Скачать руководство пользователя страница 29

Страница: 29 / 182

Chapter

Erro! Estilo não definido.

1-9

1.3.2 ADSL Access Mode

Depending on the way it is accessed to Internet, ADSL employs slightly different

protocols. No matter what protocol is used by ADSL, ADSL is based on the most

fundamental protocol - TCP/IP, and supports all TCP/IP program applications.

1.3.2.1 Leased Line Access

In this mode, ISP provides static IP address and host name. Since ADSL outputs LAN

signals directly, it has the same software settings as LAN, and employs TCP/IP directly.

1.3.2.2 Virtual Dial-up Mode

As its name implies, the virtual dial-up mode resembles ordinary dial-up for Internet

access. This mode is easy to use and user-friendly. It involves account authentication

and IP address allocation. However, ADSL is not connected with a specific ISP access

code (like 163 or 169), but with an ADSL VPN access server. Because of simple

installation and maintenance, the LAN virtual dial-up mode has become the

mainstream of ADSL virtual dial-up. In addition, it has an independent set of network

protocol - PPPoE for account authentication and IP allocation.

Point to Point Protocol over Ethernet (PPPoE) is made and developed to satisfy more

and more broadband online equipment (such as ADSL, wireless, and cable TV), and

the increasingly faster Internet communication. It is based on two widely accepted

standards: Ethernet and PPP. The end users do not need to know much about the LAN

technology, but only to take the ADSL access as common dial-up access. There is no

need for service providers to support the leased line mode by performing large-scale,

costly reconstruction of existing Ethernet and setting IP address to bind subscribers.

This makes PPPoE superior to other protocols in broadband access services. Therefore,

it has come to be the best choice for broadband Internet access. In essence, PPPoE is a

relay protocol between Ethernet and dial-up network. It inherits the high-speed feature

of Ethernet and the features of the PPP dial-up, such as simplicity, user authentication,

and IP address allocation.

Содержание ZXDSL 9210 (V3.1)























































































































































































Результаты поиска

Содержание ZXDSL 9210 (V3.1)

Отзывы:

Похожие инструкции для ZXDSL 9210 (V3.1)

Бренды по названию

Популярные бренды

Zte ZXDSL 9210 (V3.1), Техническое руководство

Результаты поиска

Содержание ZXDSL 9210 (V3.1)

Отзывы:

Похожие инструкции для ZXDSL 9210 (V3.1)

Бренды по названию

Популярные бренды