Get Started
3
If your phone is not yet activated, see
Note:
Do not press the
Volume Button
when turning the phone on. Otherwise, you may switch
your phone to Download Mode, Recovery Mode, or Factory Testing Mode. To switch back to
normal, press and hold the
Power
button for about 15 seconds.
Activation and Service
Before using your phone, you must set up your service with Boost Mobile. You will need your
phone’s serial number (MEID), printed on the box label or on a sticker under the UICC card
cover on the back of the phone.
Create Your Account and Pick Your Plan
Set up your Boost Mobile account.
2.
Enter your phone’s MEID and click
start activation process
.
Your phone’s MEID (serial number) is printed on the sticker located on the back of
your phone. This number can also be found on the bottom panel of the phone’s
package.
3. Follow the remaining instructions to choose your plan and select a payment method.
4.
Follow the activation instructions below and you’ll be able to start using your phone.
Note:
You can also activate by phone by calling
1-888-BOOST-4U
(1-888-266-7848) from any
other phone.
Activate Your Phone
After setting up your account on
, simply turn your device on. Your device is
designed to activate automatically. If you are swapping from another Boost Mobile device to a
new one, be sure to turn off the old device before swapping the serial number (MEID). Once the
MEID swap is complete, turn on the new device and the programming information will be
pushed to your device automatically.
You can also start the activation process manually.
■ Touch
>
>
Settings
>
Activate this device
.
Manage Your Account
Access information about your account. You can:
●
Check your minutes.
●
Re-Boost
®
(add money to your account).
