Zoomtak Telephonics ADSL X5, Быстрый старт

Страница: 8 / 36

8 ADSL X5 Quick Start
3333
Plug the included power cube into a power strip or wall outlet
and then into the modem’s power (
PWR ) jack.
Important!
Only use the power cube shipped with the X5. Other power
cubes may damage your hardware.
The PWR light on the front panel of the modem should
become steady on, and the ADSL light should blink once. If
the PWR light does not turn on, make sure there is power at
the wall outlet or power strip where you plugged in the power
cube.
4444
Turn the computer on. If you are using the USB port, you may
see a Found New Hardware box indicating the progression
of the installation. Typically no user action is necessary. If you
are using Windows XP, you may be required to click Next .
Depending on your operating system, you may also see a
Hardware Installation box or a Digital Signature Not
Found box. You can safely ignore these messages and click
Yes or Continue Anyway . If prompted, click Finish and/or
Yes to restart your computer to finish setting up your new
hardware.
5555
Plug one end of the supplied phone cord into the modem’s
ADSL jack and the other into the ADSL wall jack. The ADSL
light should blink and then become steady on. If it does not,
refer to Troubleshooting Tips on page 24.