Zoomtak Telephonics ADSL X5, Быстрый старт

Страница: 7 / 36

7
Step 2: Installing the Hardware
Be sure that you have already installed the software BEFORE
beginning this section.
1111
Shut down your computer (if it is not shut down already). This
is the computer on which you just installed the software.
2222
Connect the modem to either the computer’s Ethernet port or
USB port. You should only be connecting to the USB port if
your computer does not have an Ethernet port or if you plan
to connect five computers directly to the X5 modem.
¾
If you are using an Ethernet port: Plug one end of the
Ethernet cable into one of the X5 modem’s LAN ports
(
1 , 2 , 3 , or 4 ) and plug the other end into your computer’s
Ethernet port.
Important!
Do not connect additional computers or a network device
(such as a wireless access point, router, hub, or switch) to
the other LAN ports at this time. These instructions will
let you know when to connect them.
¾
If you are using a USB port: Plug one end of the USB
cable into the modem’s USB port and the other end into
your computer’s USB port.
The connection is made to the back panel of the modem.