Zoomtak Telephonics ADSL X5, Быстрый старт

Страница: 22 / 36

22 ADSL X5 Quick Start
To Connect Additional Computers
1111
Shut down the computer you want to add to the X5. (This is
important because the computer must locate the correct IP
address for the modem. This is done when the computer is
turned back on in step 3 below.)
2222
Plug one end of an Ethernet cable into one of the modem’s
LAN ports (
1 , 2 , 3 , or 4 ) and plug the other end into your
computer’s Ethernet port.
Note:
At this point, you should not be connecting any of your
additional computers using the X5 modem’s
USB port. If you
planned to use the USB port, it would already be connected to
the computer on which you installed the software, as explained
earlier in this Quick Start.
3333
Turn on the computer.
4444
Verify that your Internet connection is working. Open your
Web browser (i.e., Internet Explorer or Netscape Navigator)
and try to connect to a familiar Web address.
5555
Repeat steps 1–4 for each computer you want to add.
Congratulations! You have completed all you need to do to get
your additional computers on the Internet. You are done with this
Quick Start. Enjoy your X5!