Zoomtak Telephonics ADSL X5, Быстрый старт

Страница: 5 / 36

5
•
If you will be connecting a network device (such as a
wireless access point, router, hub, or switch): You must
install the software on a computer that will be directly
connected to the X5—preferably using the computer’s
Ethernet port. This means that if you have a network device,
you should choose a computer to connect to the modem (the
actual physical connection will be made later in this Quick
Start) and install the software on it. For most users, this will
probably be the computer that is closest to the ADSL-enabled
phone jack. If you were already planning to connect multiple
computers directly to the X5 (in addition to a network device),
review the previous two bullets to determine which computer
to install the software on.
You MUST install the software BEFORE installing the
hardware.
Important!
If you need to use the X5 modem’s USB option, you must remove
any existing USB modem drivers on your computer before
installing this software. On the desktop, click the Start button, and
then—depending on your computer—either click Control Panel ,
or click Settings and then Control Panel . In the Control Panel ,
double-click Add/Remove Programs . On the Add/Remove
Program Properties dialog box, select the USB modem you are
removing on the Install/Uninstall tab, click Remove , and then
click OK .
1111
Turn on your computer (if it is not on already).
2222
Insert the supplied CD into the CD-ROM drive of your
computer. The CD should start automatically and the
Language Selection screen should appear. (If the CD does
not start automatically, on the desktop, click the Start button,
click Run , and then type D:\setup.exe , where D is the letter
of your CD-ROM drive.)