Zoom F4 Скачать руководство пользователя страница 91

Страница: 91 / 160

Output settings

Setting signals sent to the output jacks (Routing)

Multi Track Field Recorder

NOTE

•

You cannot set L/R, MAIN OUT 1/2 or SUB OUT 1/2 to
prefader.

•

You cannot select the 1–6, L/R , MAIN OUT 1/2 and SUB
OUT 1/2 tracks at the same time. Selecting one will dese-
lect any other.

HINT

Press

to cycle through the options:

Prefader

→

Postfader

→

Off.

To make the headphone out-

put mono, use

to select

MONO MIX, and press

To monitor a mid-side stereo

signal, use

to select

MS, and press

NOTE

•

Mid-side stereo monitoring is disabled for stereo-linked
tracks that have Stereo Link Mode set to MS Stereo Link.

•

When mid-side stereo monitoring is enabled, the pre-
fader tracks will be routed automatically to the headphone
channels, with odd to the left and even to the right. In this
case, the routing cannot be changed manually.

HINT

Signals from a mid-side stereo mic can be converted to an
ordinary stereo signal for monitoring (MS stereo monitoring).

Press

Содержание F4

































































































































































Результаты поиска

Содержание F4

Отзывы:

Zoom F4, Руководство по эксплуатации, Страница: 91 / 160

Результаты поиска

Содержание F4

Отзывы: