Zoom F4 Скачать руководство пользователя страница 17

Страница: 17 / 160

eparations

;\Y

UPUN[OLWV^LYVUHUKVɈ

Multi Track Field Recorder

Turning the power on and off

Turning the power on

Press and hold

briefly.

The

LED will light.

NOTE

•

The first time you turn the power on after purchase, you
must set the date/time (

→

P.18). You can also change this

setting later.

•

If “No Card!” appears on the display, confirm that an SD
card is inserted properly.

•

If “Protected!” appears on the display, the SD card
write-protection is enabled. Slide the lock switch on the
SD card to disable write-protection.

•

If “Invalid Card!” appears on the display, the card is not
formatted correctly . Format the card or use a different
card. To format an SD card, see P.144

Turning the power off

Press and hold

briefly.

NOTE

Keep pressing it until the ZOOM logo appears on the LCD.

Disabling the Auto Power Off function

The power will automatically turn off if the

is unused

for 10 hours. If you want the power to stay on always, disable
the automatic power saving function.

Press

Use

to select SYSTEM,

and press

Use

to select Auto Power

Off, and press

Use

to select Off,

and press

Содержание F4

































































































































































Результаты поиска

Содержание F4

Отзывы:

Zoom F4, Руководство по эксплуатации, Страница: 17 / 160

Результаты поиска

Содержание F4

Отзывы: