Zoom F4 Скачать руководство пользователя страница 27

Страница: 27 / 160

Recor

ding

Adjusting the input levels and monitoring balance

Multi Track Field Recorder

Adjusting the input levels and monitoring balance

Open the mixer on the Home

Screen. (

→

P.11)

Press

Use

to select the param-

eter you want to adjust, and

press

HINT

You can select TRIM or FADER.

Use

for the track you

want to adjust to change the

parameter value.

The selected parameter value
changes in response to the oper-
ation of

HINT

The position of the knob on the display always shows the
current setting.

NOTE

After changing the parameter be adjusted, for example, if the
positions of

and the knob on the display are different,

moving

will not affect that setting.

In this case, if you adjust

to match the position of

the knob on the display, the display knob and

will be

relinked, and you will be able to use it to adjust the setting
value again.

Parameter

Setting range

Explanation

TRIM

Input connected using XLR plug
(Mic): +10–+75 dB
Input connected using TRS plug
(Line):

−

10–+55 dB

This adjusts the
input level.

FADER

Mute,

−

48.0 – +12.0 dB

This adjusts the
monitoring level.

NOTE

•

These monitoring level settings only affect the output signals.
They have no effect on recorded data.

•

Monitoring level settings are saved separately for each take. They
can be changed during playback. (

→

P.50)

•

Mix settings are not saved with the take when the recorded file
format is MP3.

You can adjust the input levels (TRIM) and monitoring levels (FADER) of each track.

Содержание F4

































































































































































Результаты поиска

Содержание F4

Отзывы:

Zoom F4, Руководство по эксплуатации, Страница: 27 / 160

Результаты поиска

Содержание F4

Отзывы: