Zoom F4 Скачать руководство пользователя страница 148

Страница: 148 / 160

Other functions

<WKH[PUN[OLÄYT^HY

148

Updating the firmware

Install new batteries in the

or connect a

charged DC power supply to the DC IN connector.

NOTE

Updating the firmware is not possible if the remaining bat-
tery or DC power supply charge is low. In this case, replace
the batteries with new ones or use a charged DC power
supply.

Copy the file for updating the firmware to the root

directory on an SD card.

Load the SD card into the SD CARD 1 slot, and turn

the power on while pressing

NOTE

If an SD card is loaded in the SD CARD 2 slot, eject it.

Use

to select "Yes",

and press

NOTE

Do not turn the power off or remove the SD card during a
firmware update. Doing so could cause the

to become

unstartable.

After the firmware update

completes, turn the power

off.

The

firmware can be updated to the latest version.

An update file for the latest version can be downloaded from the ZOOM website (www.zoom.co.jp).

Содержание F4

































































































































































Результаты поиска

Содержание F4

Отзывы:

Zoom F4, Руководство по эксплуатации, Страница: 148 / 160

Результаты поиска

Содержание F4

Отзывы: