Zoom F4 Скачать руководство пользователя страница 87

Страница: 87 / 160

Input settings

Adjusting multiple track input levels together (T

rim Link)

Multi Track Field Recorder

Adjusting multiple track input levels together (Trim Link)

The input levels of multiple tracks can be linked and adjusted at the same time.

Press

Use

to select INPUT,

and press

Use

to select Trim Link,

and press

HINT

You can also open the Trim Link screen from the Home
Screen by pressing

while pressing and holding

Use

to select a track to link, and press

Clear all settings

Linked
Not linked

HINT

•

You can use

for the first track in a link group to adjust

all the input levels within that group at the same time.

•

Icons for group names are shown next to linked tracks.

NOTE

•

A track cannot be in more than one group at a time.

•

The input levels of tracks set to MS Stereo Link will also be
linked if those tracks are put into groups.

Содержание F4

































































































































































Результаты поиска

Содержание F4

Отзывы:

Zoom F4, Руководство по эксплуатации, Страница: 87 / 160

Результаты поиска

Содержание F4

Отзывы: