Zoom F4 Скачать руководство пользователя страница 49

Страница: 49 / 160

Playback

Playing r

ecor

dings

Multi Track Field Recorder

Playing recordings

Press

■

Playback operations

Select playback take or

jump to mark:

Press

Search backward/forward: Press and hold

Pause/resume playback: Press

NOTE

•

If a track has no playback file, no track number is shown
for it.

•

If 1-6 and L/R have playback tracks, the L/R tracks will not
be played.

HINT

•

The longer you press and hold

, the faster the

speed of searching backward/forward.

•

During playback, press track keys to switch between play-
ing back (lit green) and muted (unlit).

•

An "Invalid Take!" message will appear if the selected take
is not valid.

•

A "No Take!" message will appear if no playable take exists.

•

During playback, you can press

to add a mark that

can be used for skipping. (

→

P.140)

Press

to return to the Home Screen.

Содержание F4

































































































































































Результаты поиска

Содержание F4

Отзывы:

Zoom F4, Руководство по эксплуатации, Страница: 49 / 160

Результаты поиска

Содержание F4

Отзывы: