manualshive.com logo in svg

Zoom F4, Руководство по эксплуатации, Страница: 23 / 160

Поделиться
Скачать
Zoom F4 Скачать руководство пользователя страница 23

Recor

ding

:L[[PUN[OL:+JHY

K\ZLKMVYY

LJVY

KPUNHUKY

LJVY

KPUNÄSLMVYTH[

F

 Multi Track Field Recorder

23

Setting the SD card used for recording and recording file format

The recording file format can be set independently for SD card slots 1 and 2.

HINT

• 

By using the same settings for both card slots, recording the same 
contents  to  two  cards  is  possible. This  function  can  be  used  to 
create a backup in case the sound skips on one card, for example.

• 

You can also record tracks 1–6 unmixed on one SD card, while 
recording  all  tracks  mixed  together  as  MP3  data  with  left  and 
right tracks on the other SD card.

1. 

Press 

m

.

2. 

Use 

e

 to select REC/PLAY, 

and press 

E

.

3. 

Use 

e

 to select Rec to SD1 

or Rec to SD2, and press 

E

.

4. 

Use 

e

 to select the file 

type, and press 

E

.

Setting value

Tracks  
recorded

Explanation

None

–

Nothing will be recorded on the 
SD cards.

Tr1-6 
(POLY WAV)

Selected tracks 
1-6

A single poly file will be created 
that contains audio for multiple 
tracks.

Tr1-6 
(MONO/ST WAV)

A single mono file is created for 
each mono track and a single 
stereo file is created for each 
stereo track.

Tr1-6 + L/R 
(POLY WAV)

All selected 
tracks

A single poly file will be created 
that contains audio for multiple 
tracks.

Tr1-6 + L/R 
(MONO/ST WAV)

A single mono file is created for 
each mono track and a single 
stereo file is created for each 
stereo track.

L/R (STEREO WAV)

L/R tracks

A stereo file is created based on 
the mix created by the internal 
mixer.

L/R (STEREO MP3)

Содержание F4

































































































































































Отзывы:

Нет отзывов