QUICK START
GDP-32
24
Section 4, Page 15
September 2015
Configure the channels in the Channel Table.
Check field connections.
Data Acquisition.
Review the data, and finally
Archive the data cache file.
4.11
JOB_INFO SCREEN
From the initial Main Menu screen, press
to enter the job information submenu where
Operator, Transmitter, and other job based data are entered. Programs such as TEM also use this
screen to enter loop antenna configurations, delay times, and other data which are critical to
operation or calculating final results. The Operator and Job data is common to all field programs
and will be maintained when switching between programs.
<0411a_24CSAMT_JobInfo>
For survey specific settings refer to the individual Survey Program sections.
